This LH surge is prior to ovulation which lasts just 24-48 hours. In this way, you can detect in advance the most suitable days to conceive and increase the chances of success. How to use the Alvita Ovulation Test: Keep the absorbent end in contact with your urine for 10 seconds and read the result after 5 minutes. If it is negative, the test will have to be repeated the next day, if it is positive it is time to have sex within the next 48 hours. The Alvita ovulation test is used once a day and should be used every day at the same time. HOW TO USE 1. To start the test. Open one of the packages by pulling the notch. Take the test out of the packaging. 2. Hold the rounded end of the test with one hand. Open the cap with the other hand so that the absorbent part is visible. 3. Place the absorbent tip down and under the urine stream for at least 10 seconds until it is completely wet. Do not urinate over the arrow. Alternatively, you can collect the urine in a clean container and dip half of the absorbent tip into the urine for at least 3 seconds. 4. Replace the cap and wait for the colored lines to appear. Read the result at 5 minutes. Do not read the result after 5 minutes.
Follow us